Surge - Carpet Cleaner
Carpet Spotter, Soil Break & Extraction Concentrate
All in one - carpet spotter, pre-spray and extraction concentrate. For those still wishing to apply in tank, this is the product for you. May be presprayed as well. Ideal for acrylic and nylons. Use with an acid rinse to meet Australian standards.
SURGE has been formulated and developed for those who wish to reduce the vast quantity of spotters, pre-spray cleaners and powders, etc. to just one highly concentrated, effective and economical product.
For the first time the professional cleaner can use one product to make his own pre-spotting solution, traffic lane cleaning solution as well as an extraction machine detergent. No other carpet extraction liquid tested in our laboratory matches the cleaning performance (particularly on synthetic fibres), the versatility and the price/performance parameters achieved by SURGE.
- Excellent emulsification of oily and greasy solids
- Water softeners prevent calcium build up in machinery pumps and corrosion inhibitors reduce damage to metal parts, increasing their life span
- Drying agents ensure carpet is ready for foot traffic shortly after cleaning
- Non sticky formula ensures carpets do not attract soil and stay cleaner longer
- pH: 11.5 - 12.0
- Available in 15L ( Instore Only)
Direction For Use
Whilst most carpet chemicals are effective on wool, SURGE has been formulated to be effective on synthetic carpet as well, like hard to clean loop pile acrylics most found in home units. Previously theses have required rotary scrubbing prior to extraction. SURGE, when pre-sprayed onto these carpets, reduces the need to rotary scrub.
To comply with Australian Standards, it is recommended that Acid Rinse be added for wool fibre. (See Fibre Safe).
Spotting: 1 to 5 dilution
Spotting carpets with SURGE usually is undertaken after the carpet is extraction cleaned, as most stains are removed by this first. The exception to this should be if the stains are tar like or hardened grease or paint. These should be spotted with GREASE RELEASE when the carpet is dry.
SURGE will remove just about every stain of a protein or oil nature as well as some ink; do not expect SURGE to remove old wine, tannin or soft drink stains, although some may be lightened.
At approximately 50 cents per litre, it is a very economical spotter indeed; so it can be used freely.
Caution: Always extract or rinse after using SURGE spotting solution to remove the stain and chemical residues.
Prespraying: 1 to 10 up to 1 to 15 dilution
Pre-spraying of traffic or heavily soiled "lanes" should be standard practice if the best performance is to be achieved with the lowest level of moisture and the least time spent on the job.
By spraying traffic lanes or tracked-in food or dirt, the chemical action of SURGE has a change to get to work. The results in restaurants, hotels and filthy, hard to clean carpet will amaze you.
SURGE can be used with all types of extraction equipment using either diaphragm, centrifugal or piston pumps. Unlike powder cleaners, it mixes freely and does not cause "powder clog" in pump housing or diaphragm jets and does not precipitate in chemical storage tanks or truck mount carpet cleaning equipment.
SURGE is one of the few chemicals that clean effectively in cold water; for the best performance hot water should be used: Wool carpet 70 - 74 degrees C, synthetics 80 - 85 degrees C is recommended.
Heavy soil : Dilute 1 part SURGE to 100 parts water in the solution tank (200mls to 20 litres or approximately 1 cup).
Medium soil : Dilute 1 part SURGE to 175 parts water (120mls to 20 litres or approximately 2/3 cup).
Light Soil : Dilute 1 parts SURGE to 300 parts water (50 mls to 20 litres or approximately 1/4 cup).
We have found that a stock solution of 1 part SURGE to 4 parts water gives the easiest metering control (5 litres SURGE plus 20 litres water in an empty 25 litre drum).
Brochure & Information
Read what others say about this product - Average 100% (2 reviews)
|Read more reviews on Feefo|
How Much Will My Delivery Cost?
No matter where you live in Australia, our delivery service charges are as follows:
NO Non-Sense SHIPPING COSTS
|Total Spend per Order||$150 or Less = $14.95|
|Total Spend per Order||Over $150 = Free Delivery|
Note: Please allow extra time for delivery around public holidays. In order to qualify for our delivery service
- the products that you ordered have to be in stock
- they must be ordered online
- accurate delivery details must be provided
- your delivery address must be within Australia
IF YOU HAVEN’T RECEIVED YOUR ONLINE ORDER OR IF YOU HAVE ANY QUESTIONS ABOUT AN ORDER THAT YOU HAVE PLACED, PLEASE CONTACT CUSTOMER SERVICE AND WE’LL GET ON THE CASE STRAIGHT AWAY.
How Long will my Order take to Arrive?
Here is an approximate guide to delivery times for online orders once they have been dispatched.
Business Days to Delivery
|All Areas||4-6 Days|
|All Areas||4-6 Days|
|All Areas||4-6 Days|